4.3" Can bus touch Display.

updates for these can be installed from this website:
https://nickz1969.github.io/ESPDisplay/
multi Can bus protocols supported.

Customizable screen data, 8 extra custom can bus address can be added and displayed on the layouts.

Multi screen layouts (4 currently).
Easy firmware updates from the web.

Some customising is available in the menu
AFR or Lambda is viewable.
Bar or PSI pressures.
Custom Can bus addresses.
Can I/O control and configuration menu.
Can be used as a Can bus button pad by touching the centre of the screen, 12 programmable buttons.
Brightness control.
Format SD Cards.
Redline settings.

Display can also datalog using a SD card:

RPM
AFR
AFR Target
Manifold air pressure
Coolant temperature
Inlet Air temperature
Throttle Position (TPS)
Battery Voltage
Fuel Pressure
Oil Pressure
Timing Advance
Coil Dwell
Injector Pulse Width
Vehicle Speed Sensor
Boost Pressure
Flex Fuel composition

Measurements : 135mm long, 84mm High, 30mm deep

Case is a 3d Printed in ABS plastic and can be used in cars safely.